Guide to Install Android 12 on Orange Pi 5 Plus

Here’s how to install Android on your Orange Pi 5 Plus:

1. Prepare Your Setup

• Download the required Android 12 image from the Orange Pi download page.
• Ensure you have a good quality Type-C data cable.
• Download the following tools:
  • Rockchip Driver (DriverAssitant_v5.12.zip)
  • Burning Tool (RKDevTool_Release_v3.15.zip)

2. Burn Android to eMMC

1. Connect the eMMC Module

   • If your board has an eMMC expansion interface, insert the eMMC module into the development board.
   • Install the Rockchip driver from DriverAssitant_v5.12.zip.

2. Enter MASKROM Mode

   • Press and hold the MaskROM button while powering on the board.
   • The burning tool should detect a MASKROM device.

3. Burn Android Image

   • Open RKDevTool and select the Android image .img file.
   • Click Upgrade to start burning.
   • After completion, the board will automatically boot into Android.

3. Burn Android to a TF Card (Alternative Method)

1. Prepare a TF Card (8GB+ Class 10 or higher)
2. Use SDDiskTool to Burn Android
   • Download SDDiskTool_v1.72 and the Android image.
   • Insert the TF card into your computer.
   • Open SDDiskTool and select the Android image.
   • Click Start Create to burn the image.
3. Boot the Board from TF Card
   • Insert the TF card into the Orange Pi.
   • Power on the board; Android will start automatically.

📖 Full guide on page 117

Let me know if you need more help! 🚀